-
What happens if we use 8 bit acd instead of 12 bit adc. Is it work? if it’s work then how [Rayden Dec-2026]
-
Why you are using 12 bit adc, but register is 32 bit. then how 12 bit data stored in 32 bit register [Rayden Dec-2026]
-
Explain formula to convert analog data into digital [Rayden Dec-2026]
-
What is ADC Interfacing. [AMD Dec-2025,Analogics Jan-2026]
-
In ADC Handler ,we consider conversion of voltage to °c formula ,In that formula what is 100. [AMD Dec-2025]
-
What is ADC resolution of STM32[Aanlogics Jan-2026]
-
How does data is read from the ADC and What do you mean by Sampling ?[AMD Dec-2025]
-
How do APB2 bridge know that we should read the data from ADC_DR why is not reading UART_DR register.[AMD Dec-2025]
-
Tell me about ADC where it is used in your SWMS? how did you convert Temperature.[Vem Feb-2026]
-
Why are you using ADC and what is resolution of ADC.[Vem Feb-2026]
-
How you read temperature data using LM35 [5G Testbed] [Analogics-14-08-24]
-
How LM35 is connected to Microcontroller. [5G Testbed] [Data Patterns (India) Limited-DTDS]
-
How are you sending temperature value to the server and what commands used in the project. [5G Testbed]
-
What is the throughput of WIFI module? [5G Testbed]
-
what does the size ram and flash in WIFI module? [5G Testbed]
-
what is the frequency of your Wi-Fi module [5G Testbed]
-
How LM35 is connected to MCU. [5G Testbed]
-
What is ADC resolution of STM32? [Analogics-14-08-24]
-
What is maximum voltage and temperature of LM35? [Analogics-14-08-24]
-
Explain the block diagram of STM32F401RBT6 microcontroller with LM35 Sensor.[AMD Jan-2026 ,Rayden Dec-2025]
-
How to send the temperature value to the server[Fervice Dec-2025]
-
Explain the working of ADC. [Data Patterns (India) Limited-DTDS]
-
How does ADC conversion happen? [Data Patterns (India) Limited-DTDS]
-
What is 12-bit ADC? [Data Patterns (India) Limited-DTDS]
-
What is ADC resolution? [Data Patterns (India) Limited-DTDS]
-
Explain analog vs digital signals. [Data Patterns (India) Limited-DTDS]
-
Explain process between ADC and STM32 [ Fervid Smart Solutions Pvt. Ltd]
-
Explain esp8266 WI-FI module? [ Fervid Smart Solutions Pvt. Ltd]
-
How do you convert the analog output of the LM35 sensor into digital data? [ Fervid Smart Solutions Pvt. Ltd]
-
Explain the LM35 sensor and its working principle. [ Fervid Smart Solutions Pvt. Ltd]
-
What type of output does the LM35 sensor provide? [ Fervid Smart Solutions Pvt. Ltd]
-
how data is extracted from lm35. [Kernex Micro Systems]
-
how to check whether lm35 is working properly or not. [Kernex Micro Systems]
-
Why did you use a 12-bit ADC? [Pentagon Rugged Systems Private Limited]
-
What is ADC? Explain the working principle. [Quanint Techsoft / VEM Technology]
-
Explain ADC count calculation formula: ADC_value = (Vin / Vref) × (2^n – 1) [Tenacity]
-
If Vref=3.3V, Vin=0.5V and 12-bit resolution — how many ADC counts? [Tenacity]
-
If ADC is 16-bit, reference voltage is 3.3V — find the ADC value. [Tenacity]
-
If raw value is 2, Vin=3.3V, and 10-bit — find the value. [Tenacity]
-
What happens if you use 8-bit ADC instead of 12-bit ADC? Will it work? [Rayden]
-
You are using 12-bit ADC, but the register is 32-bit — how is 12-bit data stored in a 32-bit register? [Rayden]
-
What is ADC resolution? What is sampling? [Webber / VEM Technology]
-
What is the difference between 12-bit ADC and 10-bit ADC? [Surya Electronics]
-
What is Right Alignment in ADC? [Tenacity]
-
What is Rank in ADC from configuration? [Tenacity]
-
Explain ADC modes. [Tenacity]
-
How did you interface ADC with your microcontroller and configure it? [Sanguine Inno Tech]
-
How do you convert LM35 temperature sensor data into digital data? [Sanguine Inno Tech]
-
How do you read the ADC value from LDR sensor? [Tenacity]
-
Write a HAL program for two ADC channel conversion using DMA. [Tenacity]
-
Write a HAL program for ADC Polling. [Tenacity]
-
Explain ADC internal circuit and working process. [Surya Electronics]
-
What is the ADC formula? What is the baud rate formula? [VEM Technology]
-
Assume a 12-bit ADC. If an input voltage of 1V is given, what is the minimum output voltage? [TeraScale]
-
How is ADC interfaced in your project? [TeraScale]
-
How does data get read from the ADC? [TeraScale]
-
Explain ADC and its working. [TeraScale]
-
How does the ADC handler work? In the conversion formula, what is the meaning of ‘100’ (scale factor)? [TeraScale]
-
What is the resolution of your ADC? How do you convert ADC temperature value to Celsius? [TeraScale]
-
What is the input of the LM35 sensor? How is it converted to a digital value? [TeraScale]